HV-50V470MG90Q-R2 [TAIYO YUDEN]

FOR AUTOMOTIVE CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS[HV];


型号：	HV-50V470MG90Q-R2
厂家：	TAIYO YUDEN (U.S.A.), INC
描述：	FOR AUTOMOTIVE CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS[HV]
文件：	总2页 (文件大小：247K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Spec Sheet

FOR AUTOMOTIVE CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS[HV]

HV-50V330MF80Q-R2

Features

Item Summary

33uF±20%, 50V, φ6.3x7.7mm, SMD

Lifecycle Stage

Mass Production

AEC-Q200 qualified

Standard packaging quantity (minimum)

1000

Products characteristics table

Capacitance

External Dimensions

Dimension φD

Dimension L

φ6.3 ±0.5 mm

33 uF ± 20 %

50 V

7.7 ±0.3 mm

Typ 2 mm

Rated Voltage

Dimension P (F)

Dimension C (d)

tanδ (max)

0.1

Typ 2.7 mm

Operating Temp. Range

Leakage current (min)

Rated Ripple (max)

-55 to +105 ℃

17 uA at 2 min

1600 mArms at 100k Hz / 105 ℃

1.5

Impedance ratio

___[-25℃/+20℃]

Impedance ratio

___[-55℃/+20℃]

ESR (max)

40 mΩ at 100k Hz / 20 ℃

5000 hr at 105 ℃

Endurance

___[Test time]

Endurance

Within ±30% of initial value

___[Capacitance change]

Endurance

200% or less of initial specified value

___[tanδchange]

Shape

Vertical Chip

(SMD)

Type

Conductive Polymer Hybrid

RoHS Compliance (10 subst.)

REACH Compliance (197 subst.)

Soldering

Yes

Reflow

LeadForming/Taping

Taping Embossed

2019.08.28

The data is reference only. Electrical characteristics vary depending on environment or measurement condition.

TAIYO YUDEN reserves the right to make change to the data at any time without notice.

Before making final selection, please check product specification.

http://www.ty-top.com

■

Notice for ELNA Products

Please read this notice before using the ELNA products.

REMINDERS

■

Please conduct validation and verification of the ELNA products in actual condition of mounting and operating environment before using the

ELNA products.

The product listed in this spec sheet is intended for use in general electronic equipment (e.g., AV equipment, OA equipment, home electric

appliances, office equipment, information and communication equipment including, without limitation, mobile phone, and PC), industrial

equipment, automotive interior applications, and highly public information network equipment including, without limitation, telephone

exchange, and base station, etc. Please be sure to contact TAIYO YUDEN for further information before using the product for any equipment

which may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation, automotive

powertrain control system, train control system, and ship control system, traffic signal equipment, disaster prevention equipment, medical

equipment classified as Class I, II or III by IMDRF).

Please do not incorporate the ELNA products into any equipment requiring high levels of safety and/or reliability (e.g., aerospace equipment,

aviation equipment, medical equipment classified as Class IV by IMDRF, nuclear control equipment, undersea equipment, military equipment).

When the ELNA products are used even for high safety and/or reliability‐required devices or circuits of general electronic equipment, it is

strongly recommended to perform a thorough safety evaluation prior to use of the ELNA products and to install a protection circuit as

necessary.

Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way responsible for any damages

incurred by you or third parties arising from use of the product listed in this spec sheet for any equipment requiring inquiry to TAIYO YUDEN or

prohibited for use by TAIYO YUDEN as described above.

■

Information contained in this spec sheet is intended to convey examples of typical performances and/or applications of the ELNA products and

is not intended to make any warranty with respect to the intellectual property rights or any other related rights of TAIYO YUDEN or any third

parties nor grant any license under such rights.

Please note that the scope of warranty for the ELNA products is limited to the delivered ELNA products themselves and TAIYO YUDEN shall not

be in any way responsible for any damages resulting from a fault or defect in the ELNA products. Notwithstanding the foregoing, if there is a

written agreement (e.g., supply and purchase agreement, quality assurance agreement) signed by TAIYO YUDEN and your company, TAIYO

YUDEN will warrant the ELNA products in accordance with such agreement.

■

The contents of this spec sheet are applicable to the ELNA products which are purchased from our sales offices or authorized distributors

(hereinafter “TAIYO YUDEN’s official sales channel”). Please note that the contents of this spec sheet are not applicable to the ELNA products

purchased from any seller other than TAIYO YUDEN’s official sales channel.

Caution for Export

The product listed in this spec sheet may require specific procedures for export according to “U.S. Export Administration Regulations”, “Foreign

Exchange and Foreign Trade Control Law” of Japan, and other applicable regulations. Should you have any questions on this matter, please

contact our sales staff.

相关型号：